Search

VACUUM TECHNOLOGY FOR YOUR INDUSTRY

Improve any industrial process easily with vacuum automation.

Category

Sin categoría

AR at Hispack 2018

Resultado de imagen de hispack

From May 8 to 11, we invite you to visit us at our booth at Hispack 2018, the International Packaging Exhibition held at the Gran Via – Fira Barcelona exhibition center.

You can find us at:
GRAN VIA, Palacio PABELLÓN 3, Level 0, Calle B, Stand 254

localizacion-ar-hispack18

 

 

 

 

 

Advertisements

Vacuum generator for automation and robotics (+VIDEO: Handling of flexible Packages)

  • nkxaInterchangeable vacuum cartridges. They
    allow to vary the vacuum power in an easy way.
  • Reduction of cycle times (generation of
    vacuum at point of use).
  • Push-in fitting to compressed air supply
    (Tube Ø6 / Tube Ø8).
  • Any mounting position.
  • Instant start / stop.
  • No moving parts.
  • No generation of heat or vibrations.

nkx_eng

Application example:

Handling of flexible packs

 

2a

3

5

 

 

 

 

 

 

 

 

 

 

Autonomous digital vacuum and pressure gauge.

New INDAP62 sensor (vacuum and pressure), powered by battery.

Replaces the tradicional pressure gauge. Backlit display for better viewing.

AP62_001

  • Measuring range: -1 to 10 bar.
  • Units: psi, bar, Kgf /cm2, Mpa.
  • Back light display. Auto-off after 60 seconds.
  • IP65 protection (with air intake tube).
  • Connection: G1 / 8 “, M5.
  • Replaceable battery.
  • Weight: 40 g.

 

More information – vacuum gauge INDAP62

Full range of vacuum components

VIDEO: NK vacuum ejectors

Download AR vacuum Complete catalogue (pdf)

Download General Catalogue AR (pdf)

Pag-001_Catálogo General AR 2014_re

Download General Catalogue AR (pdf)

VFP suction pads for rough surfaces

20170119_104917vfp
New suction cups for surfaces with a certain roughness or with small grooves. With bellows structure to compensate for differences in height or slight inclinations.

Available in various materials and in diameters 18 and 20 mm.

5 Advantages of pneumatic vacuum generators

ev_nk2

  1. SUPPLY
    Compressed air is usually available in the areas of industrial
    production, so just feed the vacuum ejector from the supply,
    ensuring that the working pressure is adequate.
  2. ANY MOUNTING POSITION
    The characteristics of AR vacuum generators allow mounting
    at any point of the system, regardless of orientation or
    whether it is a moving element. Mounting them close to the
    application will reduce the response time.
  3. INSTANT ON / OFF
    AR vacuum generators allow instant an repetitive on / off
    switching, which results on a major energy saving.
  4. NO MOVING PARTS
    With no moving parts inside, AR vacuum generators do not
    require any maintenance except in very dirty environments,
    where a simple cleaning is sufficient.
  5. NO HEAT GENERATION OR VIBRATIONS
    For its operating principle, vacuum generators do not heat or
    vibrate when working.

 

VZ flat suction cups

 

vz175-225_

The new range of flat suction VZ offers the following advantages:

  • Redesigned rubber anti-slip sole to withstand accelerations / decelerations in the process of moving parts.
  • Totally flat, without height differences in the contact zone, eliminates deformation when thin plates are handled. For example, when taking melamine sheets from a stack, they avoid the effect of adhesion between them, which usually occurs when other types of suction cups are used.
  • Supports handling slightly roughened surfaces, thanks to its triple sealing lip.
  • Its low height facilitates entry into limited areas (eg power presses)
  • Available in Ø175 and Ø225 mm.

 

 

 

Expansion of facilities

AR  expands its facilities in Sant Joan Despi (Barcelona) with a new mechanical workshop, mold workshop, new assembly area and new automatic vertical warehouses to stock finished product.

ar_vacuum_0018

20160915_164514

ar_vacuum_0028

Create a free website or blog at WordPress.com.

Up ↑